Quantifying salinity in heterogeneous coastal aquifers through ERT and IP: Insights from laboratory and field investigations.

The lithological and stratigraphical heterogeneity of coastal aquifers has a great influence on saltwater intrusion (SI). This makes it difficult to predict SI pathways and their persistence in time. In this context, electrical resistivity tomography (ERT) and induced polarization (IP) methods are receiving increasing attention regarding the discrimination between saltwater-bearing and clayey sediments. To simplify the interpretation of ERT data, it is commonly assumed that the bulk conductivity mostly depends on the conductivity of pore-filling fluids, while surface conductivity is generally disregarded in the spatial and temporal variability of the aquifers, particularly, once the aquifer is affected by the presence of saltwater. Quantifying salinities based on a simplified petrophysical relationship can lead to misinterpretation in aquifers constituted by clay-rich sediments. In this study, we rely on co-located data from drilled boreholes to formulate petrophysical relationships between bulk and fluid conductivity for clay-bearing and clay-free sediments. First, the sedimentary samples from the drilled wells were classified according to their particle size distribution and analyzed in the lab using spectral IP in controlled salinity conditions to derive their formation factors, surface conductivity, and normalized chargeability. Second, the deduced thresholds are applied on the field to distinguish clay-bearing sediments from brackish sandy sediments. The results are validated with logging data and direct salinity measurements on water samples. We applied the approach along the Luy River catchment and found that the formation factors and surface conductivity of the different unconsolidated sedimentary classifications vary from 4.0 to 8.9 for coarse-grained sand and clay-bearing mixtures, while normalized chargeability above 1.0 mS.m-1 indicates the presence of clay. The clay-bearing sediments are mostly distributed in discontinuous small lenses. The assumption of homogenous geological media is therefore leading to overestimating SI in the heterogeneous clay-bearing aquifers.

Validation of a 3D-printed robot-assisted partial nephrectomy training model.

Objectives: Most renal tumours can be treated with a partial nephrectomy, with robot-assisted partial nephrectomy becoming the new gold standard. This procedure is challenging to learn in a live setting, especially the enucleation and renorraphy phases. In this study, we attempted to evaluate face, content, and preliminary construct validity of a 3D-printed silicone renal tumour model in robotic training for robot-assisted partial nephrectomy. Materials and Methods: We compared the operative results of three groups of surgeons with different experience levels (>20 partial nephrectomies, 1-20 partial nephrectomies and no experience at all) performing a robotic tumour excision of a newly developed silicone model with four embedded 3D-printed renal tumours. We evaluated the participants' performance using surgical margins, excision time, total preserved parenchyma, tumour injury and GEARS score (as assessed by two blinded experts) for construct validity. Postoperatively, the participants were asked to complete a survey to evaluate the usefulness, realism and difficulty of the model as a training and/or evaluation model. NASA-TLX scores were used to evaluate the operative workload. Results: Thirty-six participants were recruited, each group consisting of 10-14 participants. The operative performance was significantly better in the expert group as compared to the beginner group. NASA-TLX scores proved the model to be of an acceptable difficulty level.Expert group survey results showed an average score of 6.3/10 on realism of the model, 8.2/10 on the usefulness as training model and 6.9/10 score on the usefulness as an evaluation tool. GEARS scores showed a non-significant tendency to improve between trials, emphasizing its potential as a training model. Conclusion: Face and content validity of our 3D renal tumour model were demonstrated. The vast majority of participants found the model realistic and useful for training and for evaluation. To evaluate construct and predictive validity, we require further research, aiming to compare the results of 3D-model trained surgeons with those of untrained surgeons in real-life surgery.

Redox-Controlled Shunts in a Synthetic Chemical Reaction Cycle.

Shunts, alternative pathways in chemical reaction networks (CRNs), are ubiquitous in nature, enabling adaptability to external and internal stimuli. We introduce a CRN in which the recovery of Michael-accepting species is driven by oxidation chemistry. Using weak oxidants can enable access to two shunts within this CRN with different kinetics and a reduced number of side reactions compared to the main cycle that is driven by strong oxidants. Furthermore, we introduce a strategy to recycle one of the main products under flow conditions to partially reverse the CRN and control product speciation throughout time. These findings introduce new levels of control over artificial CRNs, driven by redox chemistry, narrowing the gap between synthetic and natural systems.

Chemically Fueled Autonomous Sol→Gel→Sol→Gel→Sol Transitions.

Complex non-equilibrium phase behaviors are a hallmark of natural self-assembling systems. Here we show how intricate phase transitions can be achieved through a chemically fueled reaction cycle to yield autonomous sol→gel→sol→gel→sol transitions. A relay of chemical transformations based on thiazinane metathesis leads to two consecutive transient gelations in a closed system. Within seconds of fuel addition to deactivated thiazinane monomers, an imine-based hydrogel forms that consists of fibrillar microspheres. This gel quickly loses its mechanical strength and forms a solution, from which a second aldehyde-based gel nucleates and remains stable for over one day. Overall, our reaction cycle gives rise to two consecutive re-entrant phase transitions without any experimental intervention.

Efficient Photoredox Cycles to Control Perylenediimide Self-Assembly.

Photoreduction of perylenediimide (PDI) derivatives has been widely studied for use in photocatalysis, hydrogen evolution, photo-responsive gels, and organic semiconductors. Upon light irradiation, the radical anion (PDI⋅- ) can readily be obtained, whereas further reduction to the dianion (PDI2- ) is rare. Here we show that full 2-electron photoreduction can be achieved using UVC light: 1) in anaerobic conditions by 'direct photoreduction' of PDI aggregates, or 2) by 'indirect photoreduction' in aerobic conditions due to acetone ketyl radicals. The latter strategy is also efficient for other dyes, such as naphthalenediimide (NDI) and methylviologen (MV2+ ). Efficient photoreduction on the minute time-scale using simple LED light in aerobic conditions is attractive for use in dissipative light-driven systems and materials.

Insights into Chemically Fueled Supramolecular Polymers.

Supramolecular polymerization can be controlled in space and time by chemical fuels. A nonassembled monomer is activated by the fuel and subsequently self-assembles into a polymer. Deactivation of the molecule either in solution or inside the polymer leads to disassembly. Whereas biology has already mastered this approach, fully artificial examples have only appeared in the past decade. Here, we map the available literature examples into four distinct regimes depending on their activation/deactivation rates and the equivalents of deactivating fuel. We present increasingly complex mathematical models, first considering only the chemical activation/deactivation rates (i.e., transient activation) and later including the full details of the isodesmic or cooperative supramolecular processes (i.e., transient self-assembly). We finish by showing that sustained oscillations are possible in chemically fueled cooperative supramolecular polymerization and provide mechanistic insights. We hope our models encourage the quantification of activation, deactivation, assembly, and disassembly kinetics in future studies.

Fluid Drag Reduction by Magnetic Confinement.

The frictional forces of a viscous liquid flow are a major energy loss issue and severely limit microfluidics practical use. Reducing this drag by more than a few tens of percent remain elusive. Here, we show how cylindrical liquid-in-liquid flow leads to drag reduction of 60-99% for sub-mm and mm-sized channels, regardless of whether the viscosity of the transported liquid is larger or smaller than that of the confining one. In contrast to lubrication or sheath flow, we do not require a continuous flow of the confining lubricant, here made of a ferrofluid held in place by magnetic forces. In a laminar flow model with appropriate boundary conditions, we introduce a modified Reynolds number with a scaling that depends on geometrical factors and viscosity ratio of the two liquids. It explains our whole range of data and reveals the key design parameters for optimizing the drag reduction values. Our approach promises a new route for microfluidics designs with pressure gradient reduced by orders of magnitude.

Chemically Fueled Self-Sorted Hydrogels.

Narcissistic self-sorting in supramolecular assemblies can help to construct materials with more complex hierarchies. Whereas controlled changes in pH or temperature have been used to this extent for two-component self-sorted gels, here we show that a chemically fueled approach can provide three-component materials with high precision. The latter materials have interesting mechanical properties, such as enhanced or suppressed stiffness, and intricate multistep gelation kinetics. In addition, we show that we can achieve supramolecular templating, where pre-existing supramolecular fibers first act as templates for growth of a second gelator, after which they can selectively be removed.

Magnetic Control over the Fractal Dimension of Supramolecular Rod Networks.

Controlling supramolecular polymerization is of fundamental importance to create advanced materials and devices. Here we show that the thermodynamic equilibrium of Gd3+-bearing supramolecular rod networks is shifted reversibly at room temperature in a static magnetic field of up to 2 T. Our approach opens opportunities to control the structure formation of other supramolecular or coordination polymers that contain paramagnetic ions.

Helium Ion Microscopy for Reduced Spin Orbit Torque Switching Currents.

Spin orbit torque driven switching is a favorable way to manipulate nanoscale magnetic objects for both memory and wireless communication devices. The critical current required to switch from one magnetic state to another depends on the geometry and the intrinsic properties of the materials used, which are difficult to control locally. Here, we demonstrate how focused helium ion beam irradiation can modulate the local magnetic anisotropy of a Co thin film at the microscopic scale. Real-time in situ characterization using the anomalous Hall effect showed up to an order of magnitude reduction of the magnetic anisotropy under irradiation, with multilevel switching demonstrated. The result is that spin-switching current densities, down to 800 kA cm-2, can be achieved on predetermined areas of the film, without the need for lithography. The ability to vary critical currents spatially has implications not only for storage elements but also neuromorphic and probabilistic computing.

Liquid flow and control without solid walls.

When miniaturizing fluidic circuitry, the solid walls of the fluid channels become increasingly important1 because they limit the flow rates achievable for a given pressure drop, and they are prone to fouling2. Approaches for reducing the wall interactions include hydrophobic coatings3, liquid-infused porous surfaces4-6, nanoparticle surfactant jamming7, changes to surface electronic structure8, electrowetting9,10, surface tension pinning11,12 and use of atomically flat channels13. A better solution may be to avoid the solid walls altogether. Droplet microfluidics and sheath flow achieve this but require continuous flow of the central liquid and the surrounding liquid1,14. Here we demonstrate an approach in which aqueous liquid channels are surrounded by an immiscible magnetic liquid, both of which are stabilized by a quadrupolar magnetic field. This creates self-healing, non-clogging, anti-fouling and near-frictionless liquid-in-liquid fluidic channels. Manipulation of the field provides flow control, such as valving, splitting, merging and pumping. The latter is achieved by moving permanent magnets that have no physical contact with the liquid channel. We show that this magnetostaltic pumping method can be used to transport whole human blood with very little damage due to shear forces. Haemolysis (rupture of blood cells) is reduced by an order of magnitude compared with traditional peristaltic pumping, in which blood is mechanically squeezed through a plastic tube. Our liquid-in-liquid approach provides new ways to transport delicate liquids, particularly when scaling channels down to the micrometre scale, with no need for high pressures, and could also be used for microfluidic circuitry.

Devising Synthetic Reaction Cycles for Dissipative Nonequilibrium Self-Assembly.

Fuel-driven reaction cycles are found in biological systems to control the assembly and disassembly of supramolecular materials such as the cytoskeleton. Fuel molecules can bind noncovalently to a self-assembling building block or they can react with it, resulting in covalent modifications. Overall the fuel can either switch the self-assembly process on or off. Here, a closer look is taken at artificial systems that mimic biological systems by making and breaking covalent bonds in a self-assembling motif. The different chemistries used so far are highlighted in chronological order and the pros and cons of each system are discussed. Moreover, the desired traits of future reaction cycles, their fuels, and waste management are outlined, and two chemistries that have not been explored up to now in chemically fueled dissipative self-assembly are suggested.

Re-programming Hydrogel Properties Using a Fuel-Driven Reaction Cycle.

Nature uses catalysis as an indispensable tool to control assembly and reaction cycles in vital non-equilibrium supramolecular processes. For instance, enzymatic methionine oxidation regulates actin (dis-)assembly, and catalytic guanosine triphosphate hydrolysis is found in tubulin (dis-)assembly. Here we present a completely artificial reaction cycle which is driven by a chemical fuel that is catalytically obtained from a "pre-fuel". The reaction cycle controls the dis-assembly and re-assembly of a hydrogel, where the rate of pre-fuel turnover dictates the morphology as well as the mechanical properties. By addition of additional fresh aliquots of fuel and removal of waste, the hydrogels can be re-programmed time after time. Overall, we show how catalytic fuel generation can control reaction/assembly kinetics and materials' properties in life-like non-equilibrium systems.

Mechanical chiral resolution.

Mechanical interactions of chiral objects with their environment are well-established at the macroscale, like a propeller on a plane or a rudder on a boat. At the colloidal scale and smaller, however, such interactions are often not considered or deemed irrelevant due to Brownian motion. As we will show in this tutorial review, mechanical interactions do have significant effects on chiral objects at all scales, and can be induced using shearing surfaces, collisions with walls or repetitive microstructures, fluid flows, or by applying electrical or optical forces. Achieving chiral resolution by mechanical means is very promising in the field of soft matter and to industry, but has not received much attention so far.

Quantifying Guest-Host Dynamics in Supramolecular Assemblies to Analyze Their Robustness.

The most basic function of synthetic microenvironments for tissue engineering is to act as a physical substrate for cell attachment, migration, and proliferation, similar to the natural cell environment. Functionalization of supramolecular materials with guest compounds that display the same recognition moieties is a common strategy to introduce biofunctionality. However, besides a robust interaction with the material, a certain level of dynamics needs to be conserved for an adaptive interface toward the living environment. A balance between robust material functionalization and dynamic cell interaction needs to be met. The detailed analysis hereof using a ureido-pyrimidinone (UPy) poly(ethylene glycol) system in dilute and transient network regime is demonstrated. Monovalent and bivalent UPy-functionalized guest molecules are designed and their interaction with UPy-host fibers is evaluated. Analysis of guest interaction in the dilute state by microfluidics, and in the gel state, by fluorescence recovery after photobleaching and fluorescence resonance energy transfer is proven to be suitable to quantify the local and ensemble guest mobility. The results demonstrate that the interaction of bioactive moieties through supramolecular host-guest chemistry yields a dynamic system, which is stronger for divalent guests but risks unintended leakage in the case of functional monomeric units.

Oscillations, travelling fronts and patterns in a supramolecular system.

Supramolecular polymers, such as microtubules, operate under non-equilibrium conditions to drive crucial functions in cells, such as motility, division and organelle transport1. In vivo and in vitro size oscillations of individual microtubules2,3 (dynamic instabilities) and collective oscillations4 have been observed. In addition, dynamic spatial structures, like waves and polygons, can form in non-stirred systems5. Here we describe an artificial supramolecular polymer made of a perylene diimide derivative that displays oscillations, travelling fronts and centimetre-scale self-organized patterns when pushed far from equilibrium by chemical fuels. Oscillations arise from a positive feedback due to nucleation-elongation-fragmentation, and a negative feedback due to size-dependent depolymerization. Travelling fronts and patterns form due to self-assembly induced density differences that cause system-wide convection. In our system, the species responsible for the nonlinear dynamics and those that self-assemble are one and the same. In contrast, other reported oscillating assemblies formed by vesicles6, micelles7 or particles8 rely on the combination of a known chemical oscillator and a stimuli-responsive system, either by communication through the solvent (for example, by changing pH7-9), or by anchoring one of the species covalently (for example, a Belousov-Zhabotinsky catalyst6,10). The design of self-oscillating supramolecular polymers and large-scale dissipative structures brings us closer to the creation of more life-like materials11 that respond to external stimuli similarly to living cells, or to creating artificial autonomous chemical robots12.

Surface-Assisted Self-Assembly of a Hydrogel by Proton Diffusion.

Controlling supramolecular growth at solid surfaces is of great importance to expand the scope of supramolecular materials. A dendritic benzene-1,3,5-tricarboxamide peptide conjugate is described in which assembly can be triggered by a pH jump. Stopped-flow kinetics and mathematical modeling provide a quantitative understanding of the nucleation, elongation, and fragmentation behavior in solution. To assemble the molecule at a solid-liquid interface, we use proton diffusion from the bulk. The latter needs to be slower than the lag phase of nucleation to progressively grow a hydrogel outwards from the surface. Our method of surface-assisted self-assembly is generally applicable to other gelators, and can be used to create structured supramolecular materials.

Non-equilibrium steady states in supramolecular polymerization.

Living systems use fuel-driven supramolecular polymers such as actin to control important cell functions. Fuel molecules like ATP are used to control when and where such polymers should assemble and disassemble. The cell supplies fresh ATP to the cytosol and removes waste products to sustain steady states. Artificial fuel-driven polymers have been developed recently, but keeping them in sustained non-equilibrium steady states (NESS) has proven challenging. Here we show a supramolecular polymer that can be kept in NESS, inside a membrane reactor where ATP is added and waste removed continuously. Assembly and disassembly of our polymer is regulated by phosphorylation and dephosphorylation, respectively. Waste products lead to inhibition, causing the reaction cycle to stop. Inside the membrane reactor, however, waste can be removed leading to long-lived NESS conditions. We anticipate that our approach to obtain NESS can be applied to other stimuli-responsive materials to achieve more life-like behaviour.

Systems chemistry.

Building on our ability to design and synthesise molecules and our understanding of the noncovalent interactions between these molecules, the chemical sciences are currently entering the new territory of Systems Chemistry. This young field aims to develop complex molecular systems showing emergent properties; i.e. properties that go beyond the sum of the characteristics of the individual consituents of the system. This review gives an impression of the state of the art of the field by showing a diverse number of recent highlights, including out-of-equilibrium self-assembly, chemically fuelled molecular motion, compartmentalised chemical networks and designed oscillators. Subsequently a number of current challenges related to the design of complex chemical systems are discussed, including those of creating concurrent formation-destruction systems, continuously maintaining chemical systems away from equilibrium, incorporating feedback loops and pushing replication chemistry away from equilibrium. Finally, the prospects for Systems Chemistry are discussed including the tantalizing vision of the de novo synthesis of life and the idea of self-synthesising and self-repairing chemical factories.